Integrasjon av et minimalistisk sett av sensorer for kartlegging og lokalisering av landbruksroboter

Robots have recently become ubiquitous in many aspects of daily life. For in-house applications there is vacuuming, mopping and lawn-mowing robots. Swarms of robots have been used in Amazon warehouses for several years. Autonomous driving cars, despite being set back by several safety issues, are undeniably becoming the standard of the automobile industry. Not just being useful for commercial applications, robots can perform various tasks, such as inspecting hazardous sites, taking part in search-and-rescue missions. Regardless of end-user applications, autonomy plays a crucial role in modern robots. The essential capabilities required for autonomous operations are mapping, localization and navigation. The goal of this thesis is to develop a new approach to solve the problems of mapping, localization, and navigation for autonomous robots in agriculture. This type of environment poses some unique challenges such as repetitive patterns, large-scale sparse features environments, in comparison to other scenarios such as urban/cities, where the abundance of good features such as pavements, buildings, road lanes, traffic signs, etc., exists. In outdoor agricultural environments, a robot can rely on a Global Navigation Satellite System (GNSS) to determine its whereabouts. It is often limited to the robot's activities to accessible GNSS signal areas. It would fail for indoor environments. In this case, different types of exteroceptive sensors such as (RGB, Depth, Thermal) cameras, laser scanner, Light Detection and Ranging (LiDAR) and proprioceptive sensors such as Inertial Measurement Unit (IMU), wheel-encoders can be fused to better estimate the robot's states. Generic approaches of combining several different sensors often yield superior estimation results but they are not always optimal in terms of cost-effectiveness, high modularity, reusability, and interchangeability. For agricultural robots, it is equally important for being robust for long term operations as well as being cost-effective for mass production. We tackle this challenge by exploring and selectively using a handful of sensors such as RGB-D cameras, LiDAR and IMU for representative agricultural environments. The sensor fusion algorithms provide high precision and robustness for mapping and localization while at the same time assuring cost-effectiveness by employing only the necessary sensors for a task at hand. In this thesis, we extend the LiDAR mapping and localization methods for normal urban/city scenarios to cope with the agricultural environments where the presence of slopes, vegetation, trees render the traditional approaches to fail. Our mapping method substantially reduces the memory footprint for map storing, which is important for large-scale farms. We show how to handle the localization problem in dynamic growing strawberry polytunnels by using only a stereo visual-inertial (VI) and depth sensor to extract and track only invariant features. This eliminates the need for remapping to deal with dynamic scenes. Also, for a demonstration of the minimalistic requirement for autonomous agricultural robots, we show the ability to autonomously traverse between rows in a difficult environment of zigzag-liked polytunnel using only a laser scanner. Furthermore, we present an autonomous navigation capability by using only a camera without explicitly performing mapping or localization. Finally, our mapping and localization methods are generic and platform-agnostic, which can be applied to different types of agricultural robots. All contributions presented in this thesis have been tested and validated on real robots in real agricultural environments. All approaches have been published or submitted in peer-reviewed conference papers and journal articles.Roboter har nylig blitt standard i mange deler av hverdagen. I hjemmet har vi støvsuger-, vaske- og gressklippende roboter. Svermer med roboter har blitt brukt av Amazons varehus i mange år. Autonome selvkjørende biler, til tross for å ha vært satt tilbake av sikkerhetshensyn, er udiskutabelt på vei til å bli standarden innen bilbransjen. Roboter har mer nytte enn rent kommersielt bruk. Roboter kan utføre forskjellige oppgaver, som å inspisere farlige områder og delta i leteoppdrag. Uansett hva sluttbrukeren velger å gjøre, spiller autonomi en viktig rolle i moderne roboter. De essensielle egenskapene for autonome operasjoner i landbruket er kartlegging, lokalisering og navigering. Denne type miljø gir spesielle utfordringer som repetitive mønstre og storskala miljø med få landskapsdetaljer, sammenlignet med andre steder, som urbane-/bymiljø, hvor det finnes mange landskapsdetaljer som fortau, bygninger, trafikkfelt, trafikkskilt, etc. I utendørs jordbruksmiljø kan en robot bruke Global Navigation Satellite System (GNSS) til å navigere sine omgivelser. Dette begrenser robotens aktiviteter til områder med tilgjengelig GNSS signaler. Dette vil ikke fungere i miljøer innendørs. I ett slikt tilfelle vil reseptorer mot det eksterne miljø som (RGB-, dybde-, temperatur-) kameraer, laserskannere, «Light detection and Ranging» (LiDAR) og propriopsjonære detektorer som treghetssensorer (IMU) og hjulenkodere kunne brukes sammen for å bedre kunne estimere robotens tilstand. Generisk kombinering av forskjellige sensorer fører til overlegne estimeringsresultater, men er ofte suboptimale med hensyn på kostnadseffektivitet, moduleringingsgrad og utbyttbarhet. For landbruksroboter så er det like viktig med robusthet for lang tids bruk som kostnadseffektivitet for masseproduksjon. Vi taklet denne utfordringen med å utforske og selektivt velge en håndfull sensorer som RGB-D kameraer, LiDAR og IMU for representative landbruksmiljø. Algoritmen som kombinerer sensorsignalene gir en høy presisjonsgrad og robusthet for kartlegging og lokalisering, og gir samtidig kostnadseffektivitet med å bare bruke de nødvendige sensorene for oppgaven som skal utføres. I denne avhandlingen utvider vi en LiDAR kartlegging og lokaliseringsmetode normalt brukt i urbane/bymiljø til å takle landbruksmiljø, hvor hellinger, vegetasjon og trær gjør at tradisjonelle metoder mislykkes. Vår metode reduserer signifikant lagringsbehovet for kartlagring, noe som er viktig for storskala gårder. Vi viser hvordan lokaliseringsproblemet i dynamisk voksende jordbær-polytuneller kan løses ved å bruke en stereo visuel inertiel (VI) og en dybdesensor for å ekstrahere statiske objekter. Dette eliminerer behovet å kartlegge på nytt for å klare dynamiske scener. I tillegg demonstrerer vi de minimalistiske kravene for autonome jordbruksroboter. Vi viser robotens evne til å bevege seg autonomt mellom rader i ett vanskelig miljø med polytuneller i sikksakk-mønstre ved bruk av kun en laserskanner. Videre presenterer vi en autonom navigeringsevne ved bruk av kun ett kamera uten å eksplisitt kartlegge eller lokalisere. Til slutt viser vi at kartleggings- og lokaliseringsmetodene er generiske og platform-agnostiske, noe som kan brukes med flere typer jordbruksroboter. Alle bidrag presentert i denne avhandlingen har blitt testet og validert med ekte roboter i ekte landbruksmiljø. Alle forsøk har blitt publisert eller sendt til fagfellevurderte konferansepapirer og journalartikler

A secure image steganography based on JND model

Minimizing distortion produced by embedding process is very important to improve the security of hidden message and maintain the high visual quality of stego images. To achieve these objectives, an effective strategy is to perform pixel selection which is well-known as a channel selection rule. In this approach, a pixel associated with the smallest image degradation is chosen to carry secret bits. From these facts, in this paper, a new secure channel selection rule for digital images in spatial domain is designed and proposed. In this new approach, the modified matrix embedding method is utilized as data hiding method because it introduces more than one embedding change to be performed. This enables us to select a suitable pixel to embed message bits with less degradation yielded in a stego-image. In pixel selection of the proposed method, a just noticeable difference value and gradient value of a considering pixel are employed together. The experimental results (which were conducted on 10,000 uncompressed images) indicate that stego images of the proposed approach achieve a higher perceptual quality and security than those of the stego-images created by the previous approaches

A Novel Autonomous Robot for Greenhouse Applications

This paper presents a novel agricultural robot for greenhouse applications. In many greenhouses, including the greenhouse used in this work, sets of pipes run along the floor between plant rows. These pipes are components of the greenhouse heating system, and doubles as rails for trolleys used by workers. A flat surface separates the start of each rail set at the greenhouse headland. If a robot is to autonomously drive along plant rows, and also be able to move from one set of rails to the next, it must be able to locomote both on rails and on flat surfaces. This puts requirements on mechanical design and navigation, as the robot must cope with two very different operational environments. The robot presented in this paper has been designed to overcome these challenges and allows for autonomous operation both in open environments and on rails by using only low-cost sensors. The robot is assembled using a modular system created by the authors and tested in a greenhouse during ordinary operation. Using the robot, we map the environment and automatically determine the starting point of each rail in the map. We also show how we are able to identify rails and estimate the robots pose relative to theses using only a low-cost 3D camera. When a rail is located, the robot makes the transition from floor to rail and travels along the row of plants before it moves to the next rail set which it has identified in the map. The robot is used for UV treatment of cucumber plants

MARKOV MODEL IN PROVING THE CONVERGENCE OF FUZZY GENETIC ALGORITHM

Genetic Algorithms (GA) was concerned by many authors and researchers from all over the world. There were results in different fields of our lives. But the convergence of GA is an open problems. In this paper, we propose a method using Markov model to prove the convergence of GA. At first, in section 2, we review fundamental concepts in Markov Model, then we present important role of Markov model in GA (section 3). After that, in section 4, we show the weak convergence of GA base on Markov model. In the end, in section 5, we also illustrate these using experiment results

Using natural language processing to identify COVID-19 spread factors from the literature to assist with mitigation of future outbreaks

This research, presented at the Oklahoma State University Undergraduate Summer Student Research Expo, is the work of a visiting author from Southwestern Oklahoma State University.Research Experiences for Undergraduates in Computer ScienceComputer Scienc